济南瓷砖粘结剂使用步骤：

Steps for using Jinan ceramic tile adhesive:

基层处理→瓷砖粘结剂混合搅拌→批刮瓷砖粘结剂→铺贴瓷砖

Basic treatment → Mixing and stirring of ceramic tile adhesive → Batch scraping of ceramic tile adhesive → Laying of ceramic tiles

1、基层清理待贴砖基层应平整、干净、结实、无粉尘、油脂等污物及其它松散物,清理干净瓷砖背面的脱模剂、脱膜粉备用

1. The base layer to be tiled should be flat, clean, sturdy, and free of dust, grease, and other loose materials. Clean the release agent and release powder on the back of the ceramic tile for backup

2、瓷砖粘结剂混合搅拌按照水粉比1:4（1包20kg瓷砖粘结剂加5kg水）的比例先在搅拌桶内加入适量的水，然后将瓷砖粘结剂倒入搅拌桶内，边加入边用电动搅拌器搅拌，至无粉团、结块为止。拌匀后需静置5分钟，再搅拌1分钟即可使用

2. Mix and stir the ceramic tile adhesive in a water to powder ratio of 1:4 (1 pack of 20kg ceramic tile adhesive with 5kg of water). First, add an appropriate amount of water to the mixing bucket, and then pour the ceramic tile adhesive into the mixing bucket. Use an electric mixer to stir while adding until there are no powder lumps or clumps. After mixing well, let it stand for 5 minutes and stir for another 1 minute to use

3、批刮瓷砖粘结剂贴砖前，基面适量洒水润湿，用齿形刮板将胶浆涂于待贴砖基面，然后握住齿形刮板使其齿边与基面成45°角，将胶浆层梳理成均匀条状；同时将胶浆均匀涂布于瓷砖背面

3. Before applying ceramic tile adhesive for tiling, sprinkle an appropriate amount of water on the base surface to moisten it. Use a toothed scraper to apply the adhesive to the base surface to be applied, and then hold the toothed scraper to make its tooth edge form a 45 ° angle with the base surface. Sort out the adhesive layer into a uniform strip; Simultaneously apply the adhesive evenly to the back of the ceramic tile

4、铺贴瓷砖将已批刮瓷砖粘结剂的瓷砖铺压到贴砖基层，在垂直于梳理方向轻微搓动排除砖内空气，用橡皮锤敲击瓷砖表面至瓷砖四周出浆，确保瓷砖背面瓷砖粘结剂已均匀涂浆。

4. Paving tiles: Press the tiles that have already been scratched with tile adhesive onto the base layer of the tiles. Gently rub the tiles in a direction perpendicular to the combing direction to remove air inside the tiles. Use a rubber hammer to tap the surface of the tiles until grout is released around them, ensuring that the tile adhesive on the back of the tiles has been evenly applied.

薄贴法的基本特征就是，用的瓷砖粘合剂及齿型刮刀，在施工的基层先将瓷砖粘合剂梳刮成条纹状，然后再铺贴瓷砖。

The basic feature of the thin tiling method is to use professional tile adhesives and toothed scrapers to comb and scrape the tile adhesive into stripes on the construction base, and then lay the tiles.

薄贴法使用的瓷砖粘合剂厚度一般只有3-5mm，厚度比传统的厚贴法会薄上许多。

The thickness of the ceramic tile adhesive used in the thin pasting method is generally only 3-5mm, which is much thinner than the traditional thick pasting method.

瓷砖厚贴法

Thick tiling method

瓷砖厚贴法是为传统的装贴方式，采用传统水泥、沙，施工现场加水调配，厚抹灰粘贴方法，水泥砂浆的厚度一般会在15-20mm。更多相关事项就来我们网站//www.gochiism.com咨询吧！

The thick tiling method for ceramic tiles is a traditional installation method that uses traditional cement and sand, mixed with water on the construction site, and thick plastering. The thickness of cement mortar is generally 15-20mm. For more related matters, come to our website //www.gochiism.com Consult!