当我们把乳胶漆调制完成以后，其实就可以准备刷乳胶漆了。但是大家要注意，调制完的乳胶漆一般不能够直接涂刷。乳胶漆的调配，一般是使用搅拌工具搅拌均匀，让乳胶漆静置15~20分钟。这里主要的是让里面的气泡消泡，泡沫完全消除以后，就可以进行乳胶漆的正式的涂刷了。

After we have prepared the latex paint, we can actually prepare to apply it. However, it should be noted that the prepared latex paint cannot be directly applied. The preparation of latex paint is usually done by using a stirring tool to stir evenly and let the latex paint stand for 15-20 minutes. The main task here is to defoaming the bubbles inside. After the foam is completely eliminated, the latex paint can be formally applied.

①乳胶漆涂刷。此时我们就可以把工具用水润湿一下，然后把工具内的水甩干，让毛刷或者滚刷属于湿润的状态。这样用起来，会更加的快捷。然后就可以蘸取乳胶漆，此时就可以正式刷漆。

① Emulsion paint application. At this point, we can wet the tool with water and then shake the water inside the tool dry, leaving the brush or roller brush in a moist state. This way, it will be faster to use. Then you can dip in the latex paint, and then you can officially apply the paint.

②乳胶漆底漆的涂刷。对于乳胶漆的涂刷标准来说，一般都是一底两面来完成涂刷的。首先我们要刷的是底漆。底漆一般都是使用滚刷来进行的，利用滚刷蘸取乳胶漆底漆，在墙面上进行滚涂就可以了。像乳胶漆底漆的施工顺序一般都是先客厅后卧室，先顶把后墙面等一个顺序来涂刷底漆。

② Application of emulsion paint primer. For the application standard of latex paint, it is generally done with one bottom and two sides. The first thing we need to apply is primer. Primer is usually applied using a roller brush. Dip the roller brush in the latex paint primer and apply it on the wall surface. The construction sequence of latex paint primer is generally from the living room to the bedroom, from the top handle to the wall, and so on.

③乳胶漆面漆的涂刷。乳胶漆面漆的涂刷，一般要刷两遍，每遍之间要间隔2~4小时。所以在刷完底漆以后，一般停至两个小时左右，看底漆基本干燥以后，就可以刷遍面漆。对于遍面漆，也是建议大家先刷顶板后刷墙面。在刷的时候，要一刷压着一刷，如果使用滚刷，就是一滚刷压着一滚刷，中间不要留有接茬。这样把遍面漆刷完。让其自然干燥。然后接着刷第二遍面漆。面漆的涂刷与遍面漆的涂刷方式是完全一样的。

③ Application of latex paint topcoat. The application of latex paint topcoat generally requires two coats, with an interval of 2-4 hours between each coat. So after brushing the primer, it is usually stopped for about two hours to see if the primer is basically dry, and then the first coat of topcoat can be applied. For the first coat of topcoat, it is also recommended to brush the top plate first and then the wall. When brushing, one brush should be pressed against the other. If using a roller brush, it means that one roller brush is pressed against the other, without leaving any gaps in the middle. Finish the first coat of paint in this way. Let it dry naturally. Then proceed with the second coat of topcoat. The application method of the topcoat is completely the same as that of the first topcoat.

④养护。乳胶漆刷完以后，大家一定要注意养护时间。因为后期很多的乳胶漆出现了起皮，开裂，表面有颗粒，都是养护不到造成的。所以我们家里的乳胶漆的第二遍的面漆刷完以后，及时地关窗关门。这时个人建议大家家里装修就暂时停滞，一般要停滞3~5天。这个具体的时间根据天气状况而定。例如夏天一般停三天就可以了，而冬季一般停滞五天左右，这样才能保证乳胶漆表面好的效果。

④ Curing. After brushing the latex paint, everyone must pay attention to the curing time. Because many latex paints in the later stage have peeling, cracking, and particles on the surface, all of which are caused by inadequate maintenance. So after the second coat of latex paint in our home is applied, close the windows and doors in a timely manner. At this point, I personally suggest that everyone temporarily suspend their home decoration, usually for 3-5 days. The specific time depends on the weather conditions. For example, in summer, it is usually enough to stop for three days, while in winter, it is usually enough to stop for about five days to ensure a good surface effect of latex paint.

对于乳胶漆的施工，个人给出的观点就是从腻子层的表面处理开始，到后乳胶漆的养护的完成，在这个过程中，就是整个乳胶漆的施工步骤。对于乳胶漆施工，大家需要注意的就是乳胶漆的调配，一定要关注。更多相关使用就来我们网站//www.gochiism.com咨询吧！

For the construction of latex paint, my personal viewpoint is that from the surface treatment of the putty layer to the completion of the maintenance of the later latex paint, this process is the entire construction step of the latex paint. For latex paint construction, everyone needs to pay attention to the formulation of latex paint, and it is important to focus on it. For more related usage, come to our website //www.gochiism.com Consult!