粉刷石膏粉的注意事项具体是什么呢？为了让大家更好的了解以便于后期的顺利施工使用，下面济南石膏粉厂家来讲讲这个问题。

What are the precautions for plastering gypsum powder? In order to let everyone better understand and facilitate the smooth construction and use in the later period, the following Jinan gypsum powder manufacturer will talk about this problem.

粉刷石膏粉在粉刷墙面的时候有两方面的作用，一个是填充墙面缝隙，另一个是粉刷墙面使之细腻平整。这两种用途使用的是不同种类的粉刷石膏粉。

Plastering gypsum powder has two functions when painting the wall, one is to fill the gap in the wall, and the other is to paint the wall to make it delicate and smooth. These two uses use different kinds of plaster powder.

粉刷石膏是采用半水石膏为基本材料，高分子聚合物为胶凝材料，无机填料经干混而成。是一种新型改良内墙粉刷材料，改变了以水泥基为胶凝材料的习惯，与各种基底墙都有很好的相容性和粘附力。

Plastering gypsum is made of hemihydrate gypsum as the basic material, polymer as the cementitious material and inorganic filler through dry mixing. It is a new type of improved interior wall painting material, which changes the habit of using cement-based cementitious materials, and has good compatibility and adhesion with various base walls.

粉刷石膏粉的注意事项：

Precautions for plastering gypsum powder:

1、挑选适宜的勺子，勺子的巨细需与出产石膏线条的宽度、厚度成正比，越宽越厚的线条需求的石膏粉越多，选用的勺子也就越大。在勺子中参加清水，然后洒入石膏。

1. Select a suitable spoon. The size of the spoon should be proportional to the width and thickness of the gypsum line produced. The wider and thicker the line, the more gypsum powder required, and the larger the spoon selected. Join the water in the spoon and then sprinkle the plaster.

2、将拌和好的石膏浆倒入模具中，疾速转动模具，使石膏浆均匀的粘满模具，直到石膏浆不再流出摸具。

2. Pour the mixed gypsum slurry into the mold, rotate the mold quickly, and make the gypsum slurry stick to the mold evenly until the gypsum slurry no longer flows out of the mold.

3、脱模：待石膏干后，将石膏像放于平地，先将夹子拿掉，然后两手从底部开始渐渐剥去模具。(脱模时要手朝模具里边渐渐脱模，如有杂乱当地欠好脱模，可在模具外表倒适量开水使模具变软再脱模)。

3. Demoulding: after the gypsum is dry, place the gypsum image on the ground, remove the clamp first, and then peel off the mold gradually with both hands from the bottom. (during demoulding, the mold should be demoulded gradually by hand toward the inside of the mold. If there is any disorder or poor demoulding, pour an appropriate amount of boiling water on the surface of the mold to soften the mold before demoulding).

粉刷石膏粉的注意事项就是这样了，您对此有什么想知道的或者有疑问，就来我们网站//www.gochiism.com进行咨询了解吧！

This is the precautions for plastering gypsum powder. If you have any questions or questions about this, please come to our website //www.gochiism.com Consult and understand!