The reason for the delamination during the use of putty powder is that the details are not paid attention to when using, which leads to the phenomenon of delamination in the later stage of use. Therefore, we should pay attention to different solutions if we want to reduce this kind of situation, so we should pay attention to the following problems.

1、铲除脱落层，重新选择专用腻子批荡；

1. Remove the falling layer and re select the special putty;

2、严重粉化的施工面，更好用10%睡宝封闭底漆稀释液进行封固，待干燥后，再进行相应的腻子层或其他施工；

2. The construction surface with serious pulverization should be sealed with 10% Shuibao sealing primer diluent. After drying, the corresponding putty layer or other construction should be carried out;

3、腻子尤其是内墙腻子，尽可能缩短两道腻子施工的间隔；

3. For putty, especially for interior wall putty, the interval between two putty construction should be shortened as much as possible;

4、注意施工过程防护，在腻子施工过程中或施工后8小时之内，腻子更好不要被水浸润；

4. Pay attention to the construction process protection, in the putty construction process or within 8 hours after the construction, the putty had better not be soaked by water;

5、腻子选用时，咨询的腻子粉厂家，他们会给您指导。

5. When choosing putty, consult the putty powder manufacturer and they will give you guidance.

腻子粉出现脱层是非常影响后期的装修和效果的，所以在施工过程中就要多加注意，尽量避免这种情况的发生。所以我们要注意相应的问题，

Putty powder delamination is very affect the later decoration and effect, so in the construction process, we should pay more attention to avoid this kind of situation. So we should pay attention to the corresponding problems,