Commonly used putty powder equipment is usually divided into three types: horizontal putty powder equipment, complete putty powder equipment and vertical putty powder equipment.

　　立式腻子粉设备，采用圆筒立式形式，中间穿插螺杆，轴承在圆筒下部，连接有固定搅拌电机，装有装料升降机。该材料采用搅拌和抛掷中间材料的形式，达到均匀的混合效果。

　　Vertical putty powder equipment adopts cylinder vertical form, with screw inserted in the middle, bearing in the lower part of the cylinder, connected with a fixed stirring motor, equipped with a loading elevator. The material is in the form of stirring and throwing intermediate materials to achieve a uniform mixing effect.

　　卧式腻子粉料设备，以筒体敷设形式，中间穿插2 -3层螺旋皮带，筒体两端轴承，通过减速器连接到搅拌电机上，同时装有上料升降机。材料通过多层螺旋带搅拌的形式均匀混合。

　　Horizontal putty powder equipment, in the form of cylinder laying, inserts 2-3 layer spiral belt in the middle, bearings at both ends of the cylinder, connects to the mixing motor through reducer, and equips with feeding elevator. Material is evenly mixed in the form of multi-layer spiral belt stirring.

　　腻子粉成套设备是由搅拌机系统、除尘系统、包装系统、提升系统等组成的一套先进的腻子粉生产设备。

　　Putty powder complete set of equipment is an advanced putty powder production equipment composed of mixer system, dust removal system, packaging system, lifting system, etc.

　　之间的区别:

　　Differences between:

　　立式腻子粉设备:

　　Vertical putty powder equipment:

　　1. 成本低，适合小投资和个人用户。每批搅拌1000公斤的型号出厂价在3000元左右。

　　1. Low cost, suitable for small investment and individual users. The ex-factory price of 1000 kg mixer per batch is about 3000 yuan.

　　2. 搅拌速度缓慢。由于物料的局部移动，搅拌速度慢导致成品率低。

　　2. Stirring speed is slow. Due to the local movement of materials, the slow mixing speed leads to low yield.

　　3.混合均匀度低。有些材料以上抛混合的形式使用。

　　3. Low mixing uniformity. Some materials are used in the form of mixing above.

　　4. 维修率高，轴承在搅拌机下方，物料容易进入轴承，导致轴承抱死断裂。平均每3个月左右就要更换一次轴承。

　　4. Maintenance rate is high. Bearing is under the mixer. Material easily enters the bearing, which leads to the bearing locking fracture. On average, bearings need to be replaced every three months or so.

　　卧式腻子粉设备:

　　Horizontal putty powder equipment:

　　1. 成本略高，适合中小型投资。对于个人用户和企业用户，每批次1000kg搅拌的机型出厂价格约为14000。

　　1. The cost is slightly higher and suitable for small and medium-sized investment. For individual and enterprise users, the ex-factory price of 1000kg mixer per batch is about 14000.

　　2. 搅拌速度快，采用多层螺旋带搅拌，整个物料运动，速度快，产量高，平均搅拌时间在5-10分钟。

　　2. The agitation speed is fast, the whole material moves with multi-layer spiral belt agitation, the speed is fast, the output is high, the average agitation time is 5-10 minutes.

　　3.搅拌均匀性高，物料无运动，多层螺旋带，搅拌无死角，均匀性高，质量好。

　　3. High homogeneity of mixing, no movement of materials, multi-layer spiral belt, no dead angle of mixing, high homogeneity and good quality.

　　4. 维修率低，轴承位于搅拌机两端，物料不易进入，配有减速机，维修率低。

　　4. Low maintenance rate, bearing at both ends of mixer, material is not easy to enter, equipped with reducer, low maintenance rate.

　　5 .一机多用，可生产腻子粉、保温砂浆、砂浆，也可用于饲料搅拌及医药等行业。

　　5. It can be used in many fields, such as putty powder, thermal insulation mortar, king mortar, feed mixing and medicine.

　　以上是济南腻子粉设备相关信息，更多内容可点击官网咨询://www.gochiism.com/

　　The above information is about putty powder equipment in Jinan. For more information, please click on the official website: //www.gochiism.com./