Dry mixed thin layer masonry mortar is made of polymer, organic additives and other substances in a certain proportion by a specific process. The common application is the wall we often see. We can't do it without this material. What are its performance characteristics? Jinan plastering mortar manufacturer to introduce you.

　　薄层砌筑砂浆产品性能特点：

　　Performance characteristics of thin layer masonry mortar:

　　一、薄层砌筑砂浆产品特点：

　　1、 Product features of thin layer masonry mortar:

　　使用起来很方便。可以用清水搅拌。它具有高保水性、高粘结强度、高耐候性、良好的抗裂性、低收缩性、防火隔热性。

　　It's very convenient to use. It can be stirred with clear water. It has high water retention, high bonding strength, high weather resistance, good crack resistance, low shrinkage, fire and heat insulation.

　　二、薄层砌筑砂浆适用范围：

　　2、 Application scope of thin layer masonry mortar:

　　薄层砌体及抹灰层厚度一般为3-5mm，抹灰厚度不得超过8mm。

　　The thickness of thin layer masonry and plastering layer is generally 3-5mm, and the plastering thickness shall not exceed 8mm.

　　薄层砌筑砂浆

　　Thin layer masonry mortar

　　三、抹灰工艺：

　　3、 Plastering process:

　　门窗框四周填缝→墙基面清理→挂直、方正、抹饼、找平→墙面湿润（内湿外干）→薄层砌筑砂浆施工→养护→验收。

　　Caulking around the door and window frame → cleaning of the wall foundation surface → hanging straight, square, plastering and leveling → wall wetting (internal wetting and external drying) → thin layer masonry mortar construction → maintenance → acceptance.

　　a）清理基层表面杂物。基层应清洁、不松散、无灰尘和油脂。松动、开裂的部位应事先凿除修补，以免影响粘结强度。夏季，当施工或基础墙比较干燥时，可先适当浇水，使其内湿外干。

　　a) Clean the sundries on the surface of the base course. The base course shall be clean, not loose, free from dust and grease. The loose and cracked parts shall be chiseled and repaired in advance to avoid affecting the bond strength. In summer, when the construction or foundation wall is relatively dry, it can be properly watered first to make it wet inside and dry outside.

　　b）剪力墙界面应在基础处凿毛。提前用高压水枪冲洗清除界面浮灰，次日进行薄层抹灰施工。基底表面不需要进行界面粗化。

　　b) The shear wall interface shall be roughened at the foundation. One day in advance, use high-pressure water gun to wash and remove the floating ash on the interface, and carry out thin-layer plastering construction the next day. The interface coarsening is not needed on the surface of substrate.

　　c）薄层抹灰施工时，宜一次成活，厚度不大于5mm。

　　c) During the thin layer plastering construction, it is better to survive once, and the thickness is not more than 5mm.

　　d）当与不同材料连接时，应采用耐碱玻璃纤维网处理。

　　d) When connecting with different materials, alkali resistant glass fiber mesh shall be used.

　　e）地表水收集后，应及时进行表面处理。

　　e) After the surface water is collected, the surface treatment shall be carried out in time.

　　f）薄层砂浆抹面施工完成后，即可自然养护。当环境异常干燥时，可以通过浇水来治愈。

　　f) After the construction of thin-layer mortar plastering is completed, it can be cured naturally. When the environment is abnormally dry, it can be cured by watering.

　　以上是济南抹面砂浆厂家小编为大家介绍的相关内容，想要了解更多内容，欢迎访问网站：//www.gochiism.com

　　The above is the relevant content introduced by Jinan plastering mortar manufacturer. If you want to know more, please visit the website: //www.gochiism.com