一、石膏粉如何去修补墙面

1、 How to repair walls with gypsum powder

1、首先在补墙的时候我们在选购石膏粉一定要选择硬度比较好的，与水的比例为28:100，按照比例进行调和，一定要先放水，然后再加入石膏粉，石膏粉可以慢慢加入，边加边搅拌，搅拌越均匀，制作出来的石膏就会越牢固。

1. First of all, when choosing gypsum powder for wall repair, we must choose one with good hardness and a ratio of 28:100 to water. Mix according to the ratio, and make sure to drain water first before adding gypsum powder. Gypsum powder can be slowly added while stirring, and the more evenly mixed, the stronger the gypsum produced.

2、石膏的凝固时间和水量关系很大，其次就是搅拌时间、温度等等一些方面，不能加水太多，这样凝固起来会很慢，我们要适量。

2. The solidification time of gypsum is closely related to the amount of water, followed by factors such as mixing time, temperature, etc. It is not advisable to add too much water as this will slow down the solidification process. We need to use an appropriate amount.

3、我们可以在石膏粉里增加乳白胶，这样会让石膏表面看起来更加的光滑。开裂和脱落的墙面我们也要清理干净，附近周围可能起包的墙体也铲除掉，如果裂缝缝隙很深，可以在里面填补一些瓦砾当填充物，填补完后再用刮刀将石膏上的表面层磨平，与墙面融为一体，这样就修复完成了。

3. We can add milk white glue to the gypsum powder, which will make the surface of the gypsum look smoother. We also need to clean the cracked and detached walls, and remove any nearby walls that may have bulges. If the cracks and gaps are deep, we can fill them with some gravel as filling material. After filling, we can use a scraper to smooth out the surface layer of the gypsum and integrate it with the wall. This way, the repair is completed.