How to adjust putty powder and what problems should be paid attention to in the process of mixing

一，在调配腻子的时候准备工作要先做到位。大家要准备一个适合电动搅拌的容器，并且一定要将它彻底的清洁干净，同时为了确保搅拌均匀要使用低转速高功率的电动搅拌器。准备工作做好以后，就可以开始调配了。进行调配的时候，要先加入一定量的水，然后倒入腻子粉进行搅拌，一般腻子粉和水的比重应该为1：0.5.现在一般用的都是耐水腻子粉，只用清水搅拌就行了。如果有些消费者购买的腻子粉在搅拌的时候还需要加入胶水的话，那一定不是耐水腻子。因为现在的耐水腻子在制作过程中已经加入了胶粘剂，使用的都是预糊化的淀粉，而非耐水腻子里面添加的都是含有甲醛的胶水，现在已经被淘汰了，所以大家在选购的时候为了家人的身体健康，一定要了解清楚。

1、 When mixing putty, the preparation work should be done in place first. We should prepare a container suitable for electric mixing, and must thoroughly clean it. At the same time, in order to ensure uniform mixing, we should use low-speed and high-power electric mixer. After the preparations are made, the deployment can be started. When mixing, first add a certain amount of water, and then pour putty powder for mixing. Generally, the specific gravity of putty powder and water should be 1:0.5. Now, water-resistant putty powder is generally used, and only water can be stirred. If some consumers need to add glue when mixing putty powder, it must not be water resistant putty. Because the current water-resistant putty has been added with adhesives in the production process, the use of pre gelatinized starch, but not water-resistant putty, which contains formaldehyde glue, has been eliminated, so we must understand clearly when purchasing for the sake of family health.

二，大家要注意的是，搅拌的腻子浆不能太干，因为太干的话腻子粉中的添加剂不容易充分的溶解，粘接性会受到影响，而且在后期的使用过程中，也容易造成腻子层的开裂。并且腻子浆也不能太稀，过稀的腻子浆在粉刷的过程中容易造成浪费。所以大家搅拌的时候一定要注意、

2、 It should be noted that the putty slurry should not be too dry, because if it is too dry, the additives in the putty powder are not easy to be fully dissolved, and the adhesion will be affected. Moreover, in the later use process, it is easy to cause the putty layer to crack. And putty slurry can not be too thin, too thin putty slurry in the process of painting is easy to cause waste. So we must pay attention to mixing

三，腻子充分的搅拌好以后，要静置15-20分钟的时间，这个过程就是为了让腻子粉中的添加剂充分的溶解。在这里小编可以教给大家一个鉴别腻子粉的好坏的方法，那就是用腻子板进行搅拌，然后挑一点腻子浆在腻子板上，把板子反过来，腻子浆也不会掉的话，那就表示大家买的都是质量好的腻子，反之就是差一点的腻子了。

3、 After the putty is fully stirred, it should be left for 15-20 minutes. This process is to fully dissolve the additives in the putty powder. Here, Xiaobian can teach you a way to identify the quality of putty powder, that is, stir with putty board, and then pick a little putty paste on the putty board. If the board is reversed, the putty slurry will not fall off, it means that all the putty purchased are of good quality, and vice versa.

如果想要了解更多的话，比如我们济南腻子粉等等，可以咨询我们，我们会为你服务的!

If you want to know more, such as our Jinan putty powder, you can consult us, we will serve you!