欢迎您浏览济南巨野河福华建材厂,主营:济南腻子粉,济南石膏粉,济南抹面砂浆等建筑装饰材料,大量批发,欢迎咨询。

专注绿色建筑装饰材料

经营管理理念:让客户用的放心!

24小时服务热线:

13864111871

当前位置: 首页 - 济南福华建材厂下载地址 > 行业资讯
行业资讯
联系我们

济南福华建材厂

联系人:吴老师 

电话:13864111871 

手机:13864111871
          0531-81901300
地址:山东省济南市高新开发区巨野河办事处山圈村西


抗裂抹面砂浆的施工厚度是多少

来源://www.gochiism.com 日期:2020-05-27 发布人:

  裂抹砂浆是由水泥基或其他无机胶凝材料、高分子聚合物和填料根据一个特定的公式和比例的聚合物抹砂浆的生产,致力于薄表面擦拭保税苯板,以确保机械强度和耐久性的薄贴绝缘系统。我们来谈谈济南抹面砂浆的施工厚度。

  Split plastering mortar is a thin paste insulation system, which is made of cement-based or other inorganic cementitious materials, high polymer and fillers according to a specific formula and proportion of polymer plastering mortar. It is dedicated to wipe bonded benzene plate on thin surface to ensure mechanical strength and durability. Let's talk about the construction thickness of Jinan plastering mortar.
  抗裂抹灰砂浆与耐碱网布(或钢丝网)共同构成绝缘系统的增强保护层。如涂层表面采用单层耐碱网布,如瓷砖表面采用双层耐碱网布或镀锌钢丝网。因此,不同饰面材料的抗裂抹灰砂浆的施工厚度存在一定差异。薄抹灰加固保护层厚度应控制在:普通型3mm ~ 5mm,加固型5mm ~ 7mm。抗裂抹灰砂浆的应用也分为两次。普通型先铺约2mm的施工厚度,然后铺耐碱网布。然后第二次涂抹约3mm厚的抹灰砂浆。加固型抹灰砂浆抹施工厚度为2mm ~ 3mm,抹灰砂浆第二抹施工厚度为3mm ~ 4mm。
济南抹面砂浆
  Crack resistant plastering mortar and alkali resistant mesh (or steel wire mesh) constitute the reinforced protective layer of the insulation system. For example, the coating surface adopts single-layer alkali resistant mesh, for example, the ceramic tile surface adopts double-layer alkali resistant mesh or galvanized steel wire mesh. Therefore, the construction thickness of anti crack plastering mortar with different facing materials is different. The thickness of thin plastering reinforcement protective layer shall be controlled within: 3mm ~ 5mm for common type and 5mm ~ 7mm for reinforcement type. The application of anti crack plastering mortar is also divided into two times. The ordinary type is laid with a construction thickness of about 2mm, and then the alkali resistant mesh is laid. Then apply the plastering mortar about 3mm thick for the second time. The first plastering thickness of reinforced plastering mortar is 2mm ~ 3mm, and the second plastering thickness is 3mm ~ 4mm.
  在抗裂抹灰砂浆的施工中,要严格要求其涂抹施工工艺,注意防止材料的浪费,如何控制可见的“如何节约和控制抗裂抹灰砂浆的用量”。
  In the construction of anti crack plastering mortar, it is necessary to strictly require its application process, pay attention to prevent material waste, and control the visible "how to save and control the amount of anti crack plastering mortar".
  以上是济南抹面砂浆公司小编为大家介绍的相关内容,想要了解更多内容,欢迎访问网站://www.gochiism.com
  The above is the introduction of Jinan plastering mortar company. If you want to know more, please visit the website: //www.gochiism.com


Baidu
map