Jinan plastering mortar will encounter the problem of uneven mixing in production. The mixing effect directly affects the quality of products, production problems also affect the sales performance of users, and affect economic development. However, there may be two reasons for the uneven mixing of dry mortar equipment, which may be due to the user's input of materials, materials first, and then water, or because the two mixers are suitable for the user's selection. In order to protect the excellent role of dry mortar mixing equipment, the user not only needs to select the appropriate mixer according to the normal order, materials, but also production needs.

　　根据工艺计划要求和生产周期确定技能计划。包括:上料顺序、快速精密上料设备的形式及配置、计量料仓的材质、容积、料仓锥角、进出口阀门、软组合、称重传感器的型号及规格、安装及调节方式、计量计量显示及仪表控制等。额定负荷的选择一般为投料仓总皮重和称量(各种物料和物料的总量)的120%。

　　Determine skill plan according to process plan requirements and production cycle. Including: feeding sequence, form and configuration of fast and precise feeding equipment, material and volume of metering silo, silo cone angle, inlet and outlet valves, soft combination, model and specification of weighing sensor, installation and adjustment mode, metering display and instrument control, etc. The selection of rated load is generally 120% of the total tare weight and weighing (total amount of various materials and materials).

　　如果选择的规格太小，冲击载荷和意外因素可能会对称重传感器造成损坏。如果规格太大，分辨率不好，影响精度。干粉砂浆生产线投资。干粉砂浆设备生产线一次性投资大，一般企业难以承受，所以干粉砂浆生产线生产企业相对较差。另外，由于干粉砂浆的技术含量高，使用当地资料存在一定的困难，给干粉砂浆的综合推广带来困难。干粉砂浆设备在生产的过程中,可能会有遇到物料结块现象,这种情况的原因可能是由于一次性混合量太大,可以把两个或三分钟结成块状材料静态,材料放手,另一个原因可能是由于生产材料存放时间太长,外部环境的影响下,解决这个问题的一个好方法是更换材料的使用,注意保存在果实下的材料，检查材料空间一定要坚持干燥通风。

　　If the selected specification is too small, impact load and unexpected factors may cause damage to the load cell. If the specification is too large and the resolution is not good, the accuracy will be affected. Dry mortar production line investment. The production line of dry mortar equipment has a large one-time investment, which is difficult for general enterprises to bear, so the production line of dry mortar is relatively poor. In addition, due to the high technical content of dry mortar, there are some difficulties in using local data, which brings difficulties to the comprehensive promotion of dry mortar. In the production process of dry mortar equipment, there may be material caking. The reason for this may be that the one-time mixing volume is too large, two or three minutes can be formed into a block material static, and the material is released. The other reason may be that the storage time of production materials is too long, and under the influence of external environment, a good way to solve this problem is to replace the use of materials , pay attention to the materials stored under the fruit, and check the material space to be dry and ventilated.

　　以上内容由济南抹面砂浆厂家整理发布，如果您不了解这方面的装饰材料或有产品需求可以点击官网咨询://www.gochiism.comThe above content is arranged and released by Jinan plastering mortar manufacturer. If you do not know the decorative materials or have product requirements, you can click the official website for consultation: //www.gochiism.com