1. Straightness, use 2m to ruler or test ruler, the wall and ruler are the best seamless, with 2mm error, and the "meter" shape is better for acceptance.

　　2、阴阳角度应垂直于地面成一条直线，用眼睛看不出任何弯曲。尤其是墙纸的墙壁，如果阴阳角度不直，当墙纸在这些地方会出现空鼓。

　　2. The angle of yin and Yang shall be perpendicular to the ground in a straight line, and no bending can be seen with eyes. Especially for the wall of wallpaper, if the angle between yin and Yang is not straight, there will be hollowing when the wallpaper is in these places.

　　3、在工作腻子表面用细砂纸打磨达到反光效果，有金属反光的感觉。不要担心涂层或粘贴。只有这样，涂层才能光滑和光泽的背后的工作。

　　3. Polish the surface of working putty with fine sandpaper to achieve the reflective effect, with the feeling of metal reflection. Do not worry about coating or sticking. Only in this way can the coating be smooth and glossy behind the work.

　　4. 在干腻子上喷些水，观察腻子是软化了还是压碎了。若变化不大则较好，说明腻子的质量和稳定性较好。

　　4. Spray some water on the dry putty and observe whether the putty is softened or crushed. If the change is small, it is better, indicating that the quality and stability of putty are better.

　　5. 检查腻子表面是否有裂缝。裂缝必须及时处理。检查墙体与木制品是否有不明显的界限。假如腻子刮在木制品上，会影响木制品的外观光线，一定要及时清理。上面面吹腻子也可以通过以上方法接受。检查窗台、门框等小面积处，应平整无刮缝。

　　5. Check the putty surface for cracks. Cracks must be treated in time. Check if there is no obvious boundary between the wall and woodwork. If the putty is scraped on the wooden products, it will affect the appearance light of the wooden products, and it must be cleaned in time. Puttying on the upper surface can also be accepted by the above methods. Check the windowsill, door frame and other small areas, which shall be flat without scratch.

　　以上是济南腻子粉厂家为大家介绍的腻子批刮后要怎么验收的相关内容，想要了解更多内容，欢迎访问网站：//www.gochiism.comThe above is the relevant content that Jinan putty powder manufacturer introduces to you about how to check and accept putty after it is applied. For more information, please visit the website: //www.gochiism.com